Set up your network in OfferDaemon
Set up the basic network details before creating your first offer. See which extra settings can wait.
Reviewed 24 September 2026 · MyCPANetwork team
Check the settings needed for your first test and note which extra options you may need later.
Before you start
You are preparing the settings that apply to your whole network. Keep this lesson beside your admin dashboard. You will check your network name, how publishers join, and the web addresses used for links and results.
Bring your network name, website address and the time zone you use for reports. Decide whether publishers may sign up themselves or need an invitation. You will set rates and make a partner link in lesson 7.
The screenshots below were captured in Demo Network, in light mode, on 22 September 2026. The values shown are demonstration data, not a recommended business configuration. Click any screenshot to enlarge it. Use your own network’s values and generated links; do not copy the demo’s IDs.
Start small: For a first test, focus on Steps 1, 3, 4, 7, 8 and 10. You can read the other steps now and leave those controls unchanged until your own campaign needs them.
If you do not have a workspace, start an OfferDaemon trial. The current standard trial lasts 14 days and requires a card; review the current pricing and billing terms first. The guide itself remains free to read without an account.
Step 1: Check your company settings
- Sign in to your network-specific dashboard, such as
yournetwork.offerdaemon.net, using your admin account. - Open Settings → General.
- Check Network name, Slogan / tagline and Homepage URL. These should describe your business.
- Check the read-only Slug to confirm you are in the right company.
- Choose the Timezone used in reports: it determines what “today” means in the dashboard. Check Currency symbol too. Changing the symbol does not convert money from one currency to another.
- If you changed anything, click Save changes and check the confirmation.
You should now have: the right company identity and a reporting timezone you can use consistently with partners.
Step 2: Make the dashboard recognizably yours
- Open Settings → Branding.
- In Network logo, use Upload logo or Change logo, depending on whether a logo already exists.
- Choose your logo and check the resulting preview. Follow the file size and format requirements shown in the panel.
- If your main logo loses contrast on dark backgrounds, use Upload dark logo in the separate card.
- Set your Favicon—the tiny icon in a browser tab—in its own card below.
These cards have their own upload actions. Check each preview after uploading; selecting a file is not the same as a successful upload.
Step 3: Decide how publishers join
Open Settings → Registration and choose a policy for your first partners:
- Allow publisher registration enables the public sign-up page.
- Leave Auto-approve new publishers off if you want to review self-registrations before approving them.
- Registration postback sends an automatic message when someone registers. It is separate from a sale or lead report. Leave it off unless another system needs that message and you have tested it.
- Write a short Welcome message, then click Save changes if you changed the policy.
If you allow public registration, review Turnstile CAPTCHA on the same tab. To use your own Cloudflare Turnstile keys, match the configured hostname to the address publishers will use, save the site and secret keys privately, then verify the real signup page. Do not print keys in notes or screenshots.
The screenshot shows the form with manual review selected, before saving. An admin invitation is a separate path: the current Invite Publisher screen says invited accounts are pre-approved. Use invitations for partners you have already decided to admit.
Step 4: Recognize the different domains
Open Settings → Domains. A domain is the main part of a web address, such as yourbrand.com. Here, two kinds of addresses have different jobs:
| Area | What it changes | First-pilot approach |
|---|---|---|
| Redirect Domains | The hostname in publisher tracking links | Keep the working company default. |
| Custom Domain (Whitelabel) | The address used to sign in to your dashboard | Keep your network’s OfferDaemon address until you want a branded one. |
In the demo, links use demo.offerdaemon.click, while the dashboard uses demo.offerdaemon.net. Your links will use your own settings. You can choose a special tracking address for one publisher or one offer; otherwise the company default is used.
You do not need your own domain for the first test. If you later want one, use the domain setup documentation. It explains how to connect an address for dashboard sign-in or tracking links. The process uses a CNAME, a record at your domain provider that points one name to another. Finish the panel's DNS check and confirm the address opens securely over HTTPS before sharing it. A successful DNS check alone does not prove the new address works.
If your plan includes a custom dashboard address, enter a name such as app.yourbrand.com under Custom Domain (Whitelabel). At your domain provider, add the CNAME shown in the panel; it points to your network's .offerdaemon.net address. Click Check DNS, then open the new address over HTTPS before sharing it. For a tracking address, add a name such as track.yourbrand.com under Redirect Domains. Point its CNAME to the .offerdaemon.click address shown in the panel, click Verify, test a generated link, and only then make it the default.
The conversion endpoint has its own Settings → Postback URL tab. In this demo it uses the dashboard hostname; copy the actual endpoint shown for your company when you run the test in lesson 8 rather than guessing it from a tracking link.
Step 5: Review commissions before enabling extra roles
Open Settings → Commissions only if you have agreed to pay an extra referral or merchant share. Each card lets you turn the share on, enter a percentage and choose its Commission base. That base can be Payout, Revenue or Margin, so the same percentage can produce different amounts. Protect publisher privacy hides publisher contact details from the merchant view. Add any extra share to the budget you made in lesson 5.
For a simple pilot without referral or merchant agreements, leave these roles disabled. If your business does use one, record the agreed percentage and base, change the corresponding controls, click Save changes, then test a qualifying conversion before relying on the calculated commission. Avoid treating the difference between advertiser revenue and publisher payout as net profit.
Step 6: Choose network-wide offer features
Open Settings → Features. These switches determine which controls appear or apply when you configure offers:
| Control | Use it when | Check after saving |
|---|---|---|
| GEO Targeting | An advertiser allows visitors only from certain countries. | Set the allowed countries on that offer; turning on the feature alone does not set them. |
| Offer Caps | You agreed a daily or total limit on results or traffic. | Enter the limit on the offer and agree what happens when it is reached. |
| Dust Threshold | A percentage-based offer may report amounts so small that you want to ignore them or pay zero. | Check the amount and Ignore or Zero payout action in Postback Log. Leave it at zero for this fixed-rate example. |
| Custom Offer Fields | Your team needs extra offer information beyond the standard form. | Set each field’s key, label, type, visibility and whether it is required before saving an offer. |
Use only the controls your agreement needs. Changes to custom field definitions apply when an offer is next saved; they do not rewrite existing offers immediately. In lesson 7, check the resulting offer form and enter any required fields.
Step 7: Put registration-facing terms in place
Open Settings → Legal. Terms of Service and Privacy Policy are shown to publishers when they register. Add your own terms and privacy notice, including how payments and data are handled. The fields keep line breaks. Click Save changes, then open the registration page to check what a new publisher sees. This lesson does not provide legal text for your business.
Step 8: Identify the callback endpoint
Open Settings → Postback URL and find Your postback URL. This is the address that receives sale or lead reports from the advertiser. Copy gives you the address and example values. It is different from the link publishers share. In lesson 8, you will send a test report and read Postback Log.
Under Postback domains, Automatic uses a verified dashboard address when one is available, or your OfferDaemon address otherwise. Keep Automatic for a first test. If your plan allows a separate address later, add a name such as pb.yourbrand.com, create the CNAME shown in the panel and click Verify CNAME. Adding it also requests hosting setup. Check that the address works over HTTPS before using it. A green DNS result alone is not enough.
The example below is the demo company in light mode. Its postback host can differ from its redirect host; use the endpoint shown in your own dashboard.
Step 9: Review integrations and API access
In Settings → Integrations, Custom SMTP lets OfferDaemon send email through your own mail service. Email Audience Sync can copy approved publishers to a supported email provider. Neither is needed for this walkthrough. If you use SMTP later, save it and click Test Connection. That checks the connection but does not send an email; test real delivery separately with a permitted recipient. If you use audience sync, save the provider and audience ID, test the connection, check who is eligible and only then click Sync Now. Keep passwords and keys out of tutorial notes.
Settings → API keys manages secret tokens that let other software connect to your network. You do not need one for this walkthrough. If you later create one, choose only the permissions needed, record who owns it, store it securely and revoke it when no longer needed. The screen shows a new token only once. Your plan may limit what a token can do.
Step 10: Save and review your setup
Go back through the tabs you changed and check each saved state. Text settings use Save changes; branding has separate upload actions; redirect domains and API keys have their own controls. The General tab also shows your account and billing card: check the current plan, limits and data retention there before you promise a feature to a partner. A card being visible does not mean every capability is included in your plan.
Write a short setup record: network slug, timezone, registration and approval policy, domains and their verification state, enabled commission and offer features, legal text review date and any external integration owner. Do not include secrets. Now you can add the first offer without mixing company defaults with campaign-specific settings.
Check what you learned
Try to explain each idea in your own words, then tick to see a one-sentence reminder.
The network name and slug identify the company, while the timezone determines how clicks and results are grouped by day.
Logo and favicon cards have separate upload actions and previews; text settings use Save changes.
Allowing signups lets people request access, while approval controls whether they may join or use offers.
The dashboard address is for sign-in, tracking links send visitors to offers, and the postback address receives advertiser results.
Extra commissions, offer features and integrations are optional until the campaign needs them; registration-facing legal text still needs review.
0 of 5 ideas reviewed
Your progress stays in this browser.Next step
Add your first offer and prepare its publisher link.
If you prefer a guided setup, ask our team for a scoped quote. Selected new networks may also qualify for Kickstart: up to $500 in OfferDaemon subscription credit after the standard trial. It is subject to selection, not cash or an automatic benefit, and does not include our separate setup service.
Want a hand with this step?
Get practical setup help from the team behind OfferDaemon.